Lego Head Planter - easier print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Partly a remake of the Lego head planter found on Thingiverse originally designed by 3DJake.
- Ocena
- 5 / 5
- Polubienia
- 94
- Pobrania
- 444
- Wydruki
- 5
- Wyświetlenia
- 2045
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Over on Thingiverse, 3DJake uploaded a design of an enormous Lego Head Planter (https://www.thingiverse.com/thing:4907535). I tried to print it several times with no luck because I couldn't get the overhangs right. Even with support material it was impossible for me.
So I redraw the head completly and “improved” the situation. I made the bottom thinner to safe a bit of material and the slopes are better printable.
I printed the head with 0.2mm layer hight without any support. Only 3 bottom and 5 top layers, as well as at least 3 walls (0.4mm nozzle), 10% cubic infill, using around 250g of material. (It took about 8.5hours on my vCore3 @ ~150 to 160mm/s)
For the applications you will need supports. You can use all applications of their set, but I include them in this download.
If you like the design, please visit the page on thingiverse and give them a like!
Thank you 3DJake! :)