Ford 9.75 Differential Pinion Seal Driver
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a pinion seal driver for the Ford 9.75 differential commonly found in F150 pickup trucks and some Ford SUVs.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This is a pinion seal driver for the Ford 9.75 differential commonly found in F150 trucks and some Ford SUVs.
I printed it in Inland Basics PLA with 4 walls, 4 top layers, and 4 bottom layers and 15% grid infill. I printed it on a Kobra S1 using OrcaSlicer.
I was inspired by @DSMaker2110_275548's Ford 8.8 Pinion seal driver, but this is entirely my design. If you have an 8.8 differential, his design is here: https://www.printables.com/model/1517876-ford-88-differential-pinion-seal-driver
It worked well enough for my truck, but is probably a single use tool since it was just starting to mash on the top. But it's a whole lot cheaper than commercially available options for the same job. Tractor Supply had a socket that fits if you want something metal, but it was about $35 for something I was likely to never use again. $20 and I probably would have bought it, lol.
I used FordTechMakuloco's video as a guide for the repair, found here: