Chronicles of Drunagor - Bridges
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
bridges I made for my Chronicles of Drunagor board game replacement
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 1
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original bridges are nice but they are definitely to flat. lol. This is why I made them in 3D.
The clips are made so they stick to other modules like doors or field connectors.
Important:
The model is currently in beta phase. If you have recommendations to improve it - please let me know.
Especially when it comes to the slicing part you will most likely see warnings. I'm working on them but basically you can avoid them by using the "Supports: For support enforcers only" setting in Prusa Slicer.
Also this model is currently not optimized to reduce print time, but that's it. You can still print it and have fun with it.
Print settings:
I used 0.2mm (speed profile), 5% infill and Support on surface.
Glue the clips to the bridges (2 for each bridge).