Round Blimp Ball Gag for Small lapel mic.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This 3D-printed microphone blimp is designed for small microphones and lapel mics. It protects recordings from wind.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the first model I made when I bought my bambu A1. It worked out cheaper to buy the printer and work out how to make my own than buy the more expensive premade models. This model is made in OpenSCAD and designed to fit mics with the same diameter as the Clippy Mic from Mic Booster https://tinyurl.com/3ut4bwcb it will fit other 8-9mm mics. The base of the blimp has a hole for a standard 3/8" to 1/4".
The model printed here in orange is using ELEGOO PLA+ Filament 1.75mm Orange I didn't change much other than increased the nozzle temp to min: 220 Max: 240 and the bed temp (in using Cool Plate Supertac) initial layer 50 other layers 55.
I hold it together using 3m bolts and use 2m bolts to hold the clip and spacer in place.
Ive only been doing this for about 6 months so if i have missed anything important please just ask.