Bambu P1S : AMS 2 Pro Up & Forward Riser For 3D Printer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Space limitations? Do you need to bring the AMS 2 Pro forward to enable easy access to the filament reels? Try this ....
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I've created 2 versions that allow the "AMS 2 Pro" to overhang the front of the Bambu P1S 3D Printer, giving me full access to the reels, once the AMS lid is opened. My use is due to a shelf getting in the way, but your reason could be something different, that would benefit by my project.
I needed to print 2 units of for use with the AMS.
The 2 versions created are SOLID and HONEYCOMB. The times and filament use are as follows :
Solid = 02hr 48m @ 73g
Honeycomb = 02hr 40m @ 165g
I used a reel that I add filament left at the end of a reel, regardless of colour, hence the colours in the pictures.
Enjoy!