Meaco portable aircon dual hose mod (Costco exclusive - A-COSTCO12K-PRO-CH)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dual hose mod for the Costco exclusive Meaco A-COSTCO12K-PRO-CH portable air conditioning unit.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 624
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This particular portable AC model is quite rare as it seems to be a Costco exclusive and whilst Meaco do have other 12k Pro portable models they all seem to slightly differ to this. There's very little information about this model online, I picked it up from a Costco warehouse early 2026. This meant I wasn't able to find any existing dual mod models on the internet so I used my very basic modelling skills to make my own.
My 3D printer only prints 250mm in height so I've had to split this model into two parts. I wasn't really sure how to fix these together so I've added a bit of a ledge to both parts with some holes for screws of your choosing or in my case just some epoxy glue over the flat edge. If you have a bigger printer you can probably join the parts together in your slicer to print as one piece.
This should be a near perfect fit in replacement for the existing grill and is designed to use a 150mm pipe to match the exhaust diameter. You'll also need to print this hose adapter designed by another user to go on the new pipe in order to connect to this.
I've not yet got around to it but I'd suggest getting some form of fine mesh to go over the opening to avoid anything large from being sucked in from outside, not so fine it impacts airflow though.
Supports required, I used tree supports.
