3D Printed Rattle-Free Spice Rack Holder for IKEA CITRONHAJ Jars & LÄMPLIG Trivet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Create your own rattle-free camper spice rack with this custom 3D printed holder designed for IKEA CITRONHAJ spice jars
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
3D Printed Rattle-Free Spice Rack Holder for IKEA CITRONHAJ Jars & LÄMPLIG Trivet
Create your own rattle-free camper spice rack with this custom 3D printed holder designed for IKEA CITRONHAJ spice jars and the IKEA LÄMPLIG trivet.
This compact spice storage solution is perfect for camper vans, vanlife kitchens, RVs and small-space kitchens where keeping everything secure while traveling is important.
The holder clamps securely around the metal bars of the LÄMPLIG trivet and keeps the spice jars organized without rattling while driving.
Watch video how to assemble
Design Features
This 3D printed holder was designed specifically for mobile kitchens and camper use.
Features:
Designed for IKEA CITRONHAJ spice jars
Fits the IKEA LÄMPLIG trivet
Rattle-free design for traveling
Two-piece clamp system
No supports required
Easy assembly with standard M3 hardware
Lightweight but strong design
How the Holder Works
The holder consists of two printed parts that clamp around the LÄMPLIG trivet bar.
The hooks are designed with a tight fit to prevent movement and rattling while driving.
The two parts are secured with an M3 button-head bolt and M3 nut.
The button-head bolt has an important secondary function: the bottom of the spice jar rests on the bolt head. This supports the jar and prevents it from falling through the holder.
Using the correct bolt type is essential. A different bolt style with a smaller or flat head may not support the spice jar properly.
3D Printing Settings
Printed with:
Material: PETG
Layer height: 0.2 mm
Infill: 20%
Infill pattern: Gyroid
Supports: Not required
PETG is recommended because it is strong, durable and more heat-resistant than PLA, making it suitable for camper kitchen applications.
Required Hardware
To assemble one holder you will need:
M3 button-head bolt (10 mm thread length, approximately 12.5 mm total length including the head)
M3 nut
The M3 nut is inserted into the hexagonal recess on the back of the lower part. The fit is intentionally tight so the nut stays captured inside the printed part.
Compatible Spice Jars
The design was created for IKEA CITRONHAJ spice jars.
Other spice jars may also fit if they have the same diameter. Always check that the jar sits securely on the M3 button-head bolt before using it during travel.
Perfect For
This model is ideal for:
Camper van kitchens
Vanlife organization
RV kitchen storage
Tiny homes
Small kitchens
IKEA hacks
Practical 3D printing projects
Free STL Files
Download the files, print your own holders and create a secure spice storage solution for your camper kitchen.
If you make this design, I would love to see your version and how you use it in your camper setup.