LayersFactory
Zgłoś model
1 / 3
Magic Leap One Wall Mount with Controller Hook — zdjęcie 1
1 / 3

Magic Leap One Wall Mount with Controller Hook

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Pavel Tyapkin

Pavel Tyapkin

@ps_tyapkin_5047358

This is a custom-designed wall mount for Magic Leap One AR glasses

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
8
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (0)Powiązane

This is a custom-designed wall mount for Magic Leap One AR glasses, featuring an integrated hook for the handheld controller and support for the Lightpack (round computing module).

The mount is designed for adhesive installation — no drilling or screws required.

It allows you to securely store your headset and accessories on the wall while keeping them easily accessible.

The holder grips the glasses only by the side frame, without touching the lenses, ensuring safe long-term storage.

Thanks to the symmetric design, the glasses can be mounted in any orientation, depending on your preference and available space.

The model was developed and tested on Bambu Lab A1 Mini, but is fully compatible with other FDM printers.

Key Features

Wall-mounted holder for Magic Leap One;

  • Integrated controller hook;

  • Support for Lightpack (computing module);

  • Adhesive mounting (no drilling);

  • No contact with lenses;

  • Works in any orientation of glasses.

Print Settings

PETG is recommended for better strength and flexibility.

Assembly & Installation

  1. Print the model with supports enabled;

  2. Carefully remove all supports;

  3. Clean the back surface with isopropyl alcohol;

  4. Apply strong double-sided adhesive tape (e.g. VHB-type);

  5. Mount the holder on a clean, flat wall surface;

  6. Insert the glasses, controller, and Lightpack.

  7. Allow adhesive to cure before use.

Support Structure Notes

The model requires supports. Remove gently to avoid surface damage.

Compatibility

Designed for: Magic Leap One headset;

Supports: ML1 Glasses, controller, and Lightpack module;

Printers: Bambu Lab A1 Mini and any compatible FDM printers;

Installation: Adhesive mounting recommended (but you can drill holes for screws if you want).

Notes

Use high-quality adhesive tape for best results;

Not recommended for rough or dusty surfaces;

Ensure wall surface is clean and dry;

PETG is strongly recommended over PLA for long-term use;

Test-fit before final mounting.

Usage

You are free to print for personal use.

Please do not sell the model or printed parts without permission.

Showcase

If you print this model, feel free to share photos and feedback — your results help improve future versions!

Tagi

wallmountmagicheadsetvrleaparmagicleapml1