GW250 Phone Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspiration Suzuki Inazuma (GW250) doesn't provide with many options to mount the phone, so I decided to make my own.…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 375
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Inspiration
Suzuki Inazuma (GW250) doesn't provide with many options to mount the phone, so I decided to make my own.
I needed one that was out of the road's line of sight and I could see the speed, RPM and have access to the key.
I designed it specially for my Xiaomi Redmi Note 8 Pro with a thin case that I am using. It's a tight fit, so the phone feels really secure and I have access to the power and volume buttons.
Piece all together
You will need some nuts a bolts. A long bolt to connect the Under and Upper, a smaller bolt for the Connector, and 2 smaller ones for the Phone case.
For more security, I glued the Connector with the Phone case with a hot glue.
Final thoughts
I printed my own on PLA, but it is not recommended because it degrades really fast when it's outdoors. I would recommend PETG, but I don't have experience with this yet.
Category: Automotive