93-95 JDM Del Sol Fog Light Bracket

1993-1995 Honda Del Sol JDM Fog Light Brackets

A full-size PDF cutting template is included for aftermarket bumpers that do not have the factory fog light cut lines molded into the bumper. Simply print the template at 100% scale.

This project exists because the community came together loaning parts, sharing templates and documenting research.

For the people. For the platform. For free.

---

Compatible With

•1993-1995 Honda Del Sol front bumper

•OEM Del Sol JDM fog lights

•Generic 1992-1995 Civic fog light kits

▪OEM Del Sol fog bezels

▪1998-2002 Honda Accord fog bezels (minor trimming required)

---

Included Files

•3 piece bracket set(mirror in slicer for both sides)

•PDF Installation instructions - OEM

•PDF bumper cut template (print at 100% scale)

•1 piece integrated-thread version (not recommended if you have the means to assemble the 3 piece version)

---

Hardware (BOM)

●Printed Parts

•Print one Left and one Right bracket assembly(6 pieces total). The bracket needs to be mirrored, be sure to print one of each side.

Or

•Print one Left and one Right one piece bracket(2 pieces total). This bracket will also need to be mirrored.

●Hardware Required(for standard 3piece design)

•8 × M6 × 10 mm socket head bolts

•8 × M6 heat-set inserts

•8 × M4 × 20 mm socket head bolts

•8 × M4 heat-set inserts

●Additional Components

•OEM Honda Del Sol fog lights or Generic 1992-1995 Civic fog light kit

•OEM Del Sol fog bezels or 1998-2002 Accord fog bezels

---

Printing Notes

ASA, ABS, PETG, or Nylon are recommended for long-term automotive use.

PLA is not recommended due to engine bay temperatures.

Install heat-set inserts slowly using a soldering iron.

Test-fit before final installation.

An alternate version with integrated printed mounting threads is included for convenience, but it is not recommended for permanent use. Heat-set inserts provide significantly better durability and serviceability.

---

Installation Notes

•If using an OEM Del Sol bumper, use the factory fog light cut lines(located on backside of bumper near grill.

•If using an aftermarket "oem style" bumper, use the included PDF template printed at 100% scale.

•If using Accord bezels, widen and slightly square the opening after cutting to match the larger bezel profile.

---

If you build these, I'd love to see them installed. Feel free to post a make or tag @RarePartHunters so others can see what's possible when the community shares instead of gatekeeps.