1 / 2
Yamaha Jog SA-12 Speedometer Gear (16T Helical Gear) — zdjęcie 1
1 / 2

Yamaha Jog SA-12 Speedometer Gear (16T Helical Gear)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement speedometer drive spur gear for Yamaha Jog SA-12. Model designed for high strength and precise fit.

Ocena
0 / 5
Polubienia
1
Pobrania
22
Wydruki
0
Wyświetlenia
90
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

Yamaha Jog SA-12 Speedometer Gear (16T)

Replacement speedometer helical gear for Yamaha Jog SA-12. Designed for high durability and a precise fit. Successfully tested in real-world conditions after being printed with Nylon.

Technical Specifications:

  • Tooth count: 16T

  • Application: Speedometer drive assembly for Yamaha Jog SA-12 scooter.

Printing Recommendations (Nylon): Nylon is the ideal material for this part due to its exceptional wear resistance and mechanical strength.

  • Material: Nylon (PA12, PA6, or Nylon Carbon Fiber for maximum stiffness).

  • Preparation: Dry your filament thoroughly before printing. Nylon is highly hygroscopic; moisture will cause bubbles and make the part brittle.

  • Nozzle Temperature: 240–260°C (depending on your specific filament).

  • Bed Temperature: 70–90°C.

  • Adhesion: Nylon is prone to warping. Use a specialized adhesive (like PVA/PVP glue) or a PEI sheet. Printing in a closed chamber is highly recommended; if not possible, use a wide brim to keep the corners down.

  • Infill: 100% (Solid) is strongly recommended for structural integrity.

  • Layer Height: 0.12–0.16 mm to ensure accurate tooth profile definition.

Note: Please check the fitment on your drive shaft before final installation. Lubricate the gear with high-quality grease suitable for plastic/metal contact.

Tagi