Celestron C9.25 mask support ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I printed a Tri-Bahtinov mask for my C9,25 but did not take into account that it has a Celestron Dew Heater ring.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Public Domain
I made this support rings for my C9.25 that has a Dew Heater Ring on it. Needed something that would not require any cutting or alteration of a collimation mask. The mask I made it for is this one:
It does work for a Bahtinov mask that I have also.
Printed it on a Snapmaker U1 with the following settings:
PLA
Walls = 4
Infill = 15%
Pattern = Grid
Print upside down (inner ring on build plate) with supports
I hope this is a solution for fellow C 9.25 owners - if you have other SCT's with the dew heater ring, please feel free to alter this to meet your needs.
Clear skies!