1 / 2
Deck Board Spacer (Terassendielenabstandshalter)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 6mm high spacer, that spaces your deck boards 7mm apart.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Open Community License v1.1 + General Attribution v1
I needed a few more of these spacers. I ran out, just before finishing and ordering another bag didn't make much sense.
These space your deckboards up 6mm off the rafters below and they space the boards 7mm apart. I just modeled these after the ones I had. The idea is to put these below the board and then screw right through. I also made a half version for the first and last boards. You can break apart the originals, but I didn't want to model in a weak point. They didn't break apart easly anyway.