1 / 1
DD61-00175A Samsung Dishwasher Door Lock Holder — zdjęcie 1

DD61-00175A Samsung Dishwasher Door Lock Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

DD61-00175A Samsung Dishwasher Door Lock Holder

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
13
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Public Domain

OEM parts are made of cheese and astonishingly expensive.

Printed this in PLA 100% infill and has been holding up well.

Screw hole on the OEM is threaded for machine screw. The hole on this one works with a #6 x 3/8 wood screw.

If the latch hoop isn't engaging with the switch inside the door, this is also a problem with the OEM latch. The top of the dishwasher box has too much flex and can bend upwards over time. In this case you have to bend the whole top front edge of the dishwasher down until it engages properly. To stop it happening in the future, I shimmed the top of the dishwasher against the underside of the countertop.