Mercedes 190e Evo 2 Model Car
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3d Model of the Mercedes 190e Evo 2 with design features and axels.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Standard Digital File License
3d model I made of the Mercedes 190e Evo 2. The Model features a chassis, body, tires and design features. The chassis and body were modified to fit a batterie and a small motor because I made it for a competition where those electrical components were given. So you can motorize the car if you want and have the right components (example in image 3), it can only go straight though. If you only want it as a model, you can probably glue the tires to the axles.
You might have to play around a little bit with the tolerances of the windows so that they fit well.
Print Settings for the body:
0.08mm layer height, supports enabled, 15% infill
I printed the body angled with the front edge touching the build plate so that
there were no obvious layer lines:
For the side windows, you have to print them normal and mirrored of you want the same surface (print bed or top surface).
If you print my model, I would love get your feedback or see a make :)