Articulating Platypus and Platypus keychains
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4 variations of cute, smooth articulation, platypus and platypus keychains with zero assembly. Ready to go off the plate
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 31
- Wydruki
- 1
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
Articulated Print-in-Place Platypus with keychains (No Supports Required)
Meet the FIRST addition to the 3Dimensions lineup: the articulated, print-in-place Platypus and platypus keychains!
Whether you're looking for a fun desk companion, a satisfying fidget toy to hook to a bag, a benchmark piece for your printer or a piece to add to your shop, this little guy is ready to wiggle right off your build plate. We designed this model with maximum ease-of-use in mind, meaning one print, no joints to crack free and is ready to go right after printing!
✨ You'll Love These Files
True Print-in-Place: Absolutely zero assembly, supports, or glue needed.
Ready to Move: The tolerances are optimized so you won't have to forcefully break or "snap" the joints free. They are designed to articulate smoothly the moment the print finishes.
Highly Forgiving: This model was designed to be versatile and will print successfully with just about any standard settings or filament.
⚙ How to Print
We designed this model to pop right off the plate and function as intended without cracking joints, removing supports and/or brims. With that said, to keep your prints clean and smoothly moving, turn off supports and brim generation. This model will work with just about any filament. if scaling the print down, keep in mind to lower your layer heights accordingly as to not fuse joints together.
👀 What You Get
You'll receive 4 different files. between the 4 files you'll find models both with and without a flexible tail. Both also have a keychain variant. The flexible tail detail is added for personal preference and to adjust settings. printing the flexible tail too small without the proper settings will cause the tail joint to fail. To counter that, we removed the tail joint and included keychain holes to keep functionality.
when printing the model too small, there is a chance the tail gets stick to the body and cannot articulate. must ue smaller nozzle/layer hight to fix that OR use one of the "Nonflexible tail" files inclided.
Happy printing and be sure to post a photo of your makes! Thank you all