BliKVM ATX Module surface mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a surface mount for the BliKVM ATX Module with dual headers.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 13
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This mount requires two M3 3mm or 4mm socket head cap screws
Some BliKVM kits come with a wider (2 header) ATX module. The only mounts I have found are for the narrower, single header module, so I created my own for this wider module.
Since I am using this on a computer that belongs to a company I am doing work for, I don't want to install this inside the computer using the included PCI brackets. Since I need it to be easily removed, I created this mounting base. I simply double stick taped the mount to the outside of the computer case, attached the ATX module to the base and ran long Dupont cables from the external module, through a gap in the rear of the computer case, and to the power switch. This way, when I need to remove the module, I can simply disconnect the dupont cables, unscrew the module and I am off!