400w Step up Buck Boost Converter case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Step up 400W Buck boost converter case
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
400W Step up buck boost converter case
This model is 100% free and open-source. I don't run a Patreon or ask for tips—all I ask in return for the hours spent prototyping is that you hit the ❤ Liked button or post a picture of your build. It takes one second, costs nothing, and tells me the design was worth sharing , thanks.
I've been using these for running some LED panels that run on 36V off a 12V supply , anyways if you find the case handy
Can be cheaply purchased on Amazon here :
https://link.amazon/B0gTC0HnU
Printing
Recommend you use a heat tolerant Filament like PETG ASA CF , PLA may melt if you have any reasonable load on it .
No Supports needed
m2 bolts can be directly threaded into the base for the cable clamps or very small plastic screws around 2mm
Latest version 3.0
Have changed the top to have only 2 fixing holes then using the other two to screw the board into the base so it does not fall out when you take off the lid.
The 4 hole version top is also there , so you have the option of screwing the board to the base with two screws diagonally or using the 4 hole version which clamps the board with the screws coming in from the top.
If you appreciate my work drop me a HEART , like or comment thanks .