Spare leg for Keter Easy grow
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a "modular" spare leg for the Keter Easy grow (https://www.keter.com/gl_en/msdl_17194592easy-grow.html)
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 57
- Wydruki
- 1
- Wyświetlenia
- 898
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
The leg design is modular, so you can make it the same, higher or longer. The length is simply driven by how many times you print the extension part. Original length requires printing leg_extension part twice (the gcode matches the original length).
Printed with Prusament PETG Galaxy black which nicely matches the original anthracite color. The left easy grow on the cover photo has all legs original while, the right one has all replaced.
You can optionally use screws but it's not needed. I highly recommend using glue for the contact points of individual leg pieces.
I've tried to print it also as a 0.3 DRAFT, however, I had a bit of a hard time fitting joining pieces. 0.2mm/speed works perfect