Hanging Chain with Hook for Plastic Flower Pots
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 32 cm long hanging chain with a hook, designed for suspending plastic flower pots similar to the foto.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
first of all, this was inspired by Thorins model, but made it on my own.
The chain features:
A hook at the top for hanging.
A closed loop connecting the chain to the hook.
Hooks at the bottom that attach directly to the planter.
hooks goin to pot is quite stiff but it can go thrue and hold still
Strength
I tested the printed chain and hook with a static load of at least 15 kg, and both held without failure. While this is a good indication of strength, every printer, filament, and print setting is different, so use it at your own risk. I do not recommend using it for loads heavier than what you have personally tested.
Printing
The chain is designed to be printed without supports or a brim.
For the best results:
Print slowly, around 10–20 mm/s.
No supports or brim are required if you are patient and print at a low speed.
If you prefer to print faster, adding:
a brim, and
a small amount of support under the first overhanging links will improve reliability.
Personally, I didn't want to wait for a slow print, so I printed it faster with support under the initial overhangs, and it worked perfectly. exact pot https://allegro.cz/produkt/sedy-plast-kvetinac-prosperplast-24-3-cm-x-24-3-x-16-cm-23ca2e50-a4fd-408b-9611-5c6b13eba56b
Recommended Material
For outdoor use, PETG or ASA is recommended for better weather and UV resistance.
If you find this model useful, I'd appreciate seeing your makes and hearing your feedback!