1 / 1
DNT Hydra w/ ADM 170-S QD 1.54/1.6/1.7 Spacer — zdjęcie 1

DNT Hydra w/ ADM 170-S QD 1.54/1.6/1.7 Spacer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Riser to bring DNT Hydra thermals on the ADM 170-S mount up to 1.54

Ocena
0 / 5
Polubienia
3
Pobrania
9
Wydruki
0
Wyświetlenia
34
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Shim to raise the Hydra thermal to 1.54 for use at common LPVO height. 

V1 - only two holes for bolts and overhangs both sides

v2 - Has 3 bolt holes (2 M5x20 & 1 M5x12) and does not overhang on one side

There are two v2 files, one provides ~0.34"/8.58mm of height to bring the height with the ADM-170-S to 1.54.

I found that with my LPVO at 1.54" it still felt low, the other file provides ~0.4"/10.38mm of height to address that.

*Added a spacer to bring the height to 1.7"*

Tagi