1 / 2
Brake Switch Bushing for Hyundai Elantra and Others
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bushing goes between the brake switch and the pedal and eventually wears out.
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 1
- Wyświetlenia
- 43
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
This bushing goes between the brake switch and the pedal.
The original either disintegrates with age, or wears a hole into the middle, causing your brake lights to never turn off.
Start the car, press the pedal down and remove any remnants of the old bushing, place this one in and press fit until it snaps.
The g.code is set for 100% infill so hopefully it will last a while. You can print extras and just toss them in your glove box.