1 / 2
Zip Pac Bento Box HEPA Carbon filter for Creator 5 Pro — zdjęcie 1
1 / 2

Zip Pac Bento Box HEPA Carbon filter for Creator 5 Pro

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Zip Pac Bento Box HEPA Carbon filter replaces the stock Creator 5 Pro filter.

Ocena
5 / 5
Polubienia
22
Pobrania
50
Wydruki
1
Wyświetlenia
445
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

YouTube video testing the Zip Pac Bento Box:
youtube.com/shorts/rur89musENY

Zip Pac Bento Box HEPA Carbon filter for the Creator 5 Pro.  The video shows that the C5P filter fan is rated for 0.26A.  The multimeter shows that the current drops from 0.188A to 0.174A with the Zip Pac Bento Box installed.  The fan is running at 100% speed.   The Zip Pac Bento Box is filled with activated carbon and a larger HEPA filter is inserted.

Dropping current is not necessarily good.  The PWM controller and Mosfet is actually working harder to pulse the voltage.  However, this should not be even close to putting a burden on the motherboard mosfets.  The crude kleenex anemometer shows that the airflow barely changes.

It was decided to make the airflow go through the carbon > to the HEPA > to the fan.  The output blows onto the model and I wanted the HEPA to catch any carbon dust.

The magnets are 6mm x 2mm.

The HEPA filter is 40x80x15mm.  It is the filter used in the original Bento Box filter.

It should be printed with a high temperature resistant material.  The heater blows directly onto the filter opening.

Tagi