Twilight Imperium 4e + PoK + TE w/sleeved cards and no lid lift (TI4)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds all of TI4 + PoK + TE using the 8 color tokens instead of faction tokens and no Twilight's Fall.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 362
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had a few requirements for what I would consider the "perfect organizer" for myself. Having not found the exact mix of what I was looking for on any free files, I ended up repurposing some components I had printed for my TI4+POK organizer (by Hrein and lejhy) as well as several components needed for TE from MidwestModular3D)
What I wanted in an organizer was:
Holds sleeved cards (Note: I use Sleeve Kings. YMMV with your sleeves).
No/minimal lid lift
Twilight's Fall components stored separately (in the TE box and not in the main box).
Only the 8 color Command Counter and Control tokens (our group does not use the faction ones and this saves a lot of space).
Player unit boxes have room for all the color's cards and dice of that color as well
note: the bulk of these pics were taken prior to my re-printing the Red, Orange, Green, and Pink in updated colors that match the units better. I've included a list of all my updated filament colors at the bottom)
Everything had to be in its own place, and not combine multiple unrelated components into one tray
For example:
all of the planet attachments are in small trays in the base of the box
all of the "setup tokens" (Speaker, Custodians, and the new Diplomacy token) are in with the Strat cards
Avernus and Mirage are in the wedge shaped tray even though I could have tossed them in with the neutral player pieces
The three factions whose additional components couldn't fit in with the faction cards boxes have their own trays for those components
I also wanted separate trays for the TG/Comms, Fighter, and Infantry tokens for ease of setup and I wanted two trays for TGs/Comms so I could have them on both sides of the table.
Here's what you need to print, and how many of each:
8x Player_Pieces and 8x Player_Pieces_Insert
There are two options for the Player_Pieces, one with straight edges and one with rounded edges, labeled accordingly, just choose your preference. The insert is the same for both.
30x Faction_Boxes
I suggest printing these as if they are standing up. You shouldn't need supports nor a brim (I didn't use them) but you can if you want to be safe.
Note: There are two thickness sizes. I printed mine in 14mm but I'm also including the 15mm option in case your sleeves are slightly thicker. The firmament/Obsidian have a lot of cards and they barely fit in the 14mm thickness I printed for myself. You can increase the width as much as you need but any added thickness might add slight lid lift. There's no lift with the 14mm. I would print one and test the Firmament/Obsidian card fit.
3x Faction_Extras
These are used for Last Bastion, Crimson Rebellion, and Nekro Virus pieces that won't fit in with the cards.
Note: if you use 14mm or 15mm faction boxes, then print 14mm or 15mm of these to match
2x Other_Tokens
These hold all the attachments in one and the Frontier/Ingress tokens in the other.
Note: if you use 14mm or 15mm faction boxes, then print 14mm or 15mm of these to match
1x each of the System_Tiles holders (1-4)
1x Other_Cards
Image shows the way I've organized them. You could put each faction's Alliance card in with the faction cards and re-organize if desired.
1x Exploration_Cards
1x Strategy_Cards
1x Faction_and_Event_Cards
2x Infantry_or_Fighters trays
2x Trade Goods_Commodities trays
1x Avernus_and_Mirage tray
1x Neutral_Factions tray
I think that's all of the files, but please let me know in the comments if it appears I forgot something or if you need assistance with organizing them all (the pictures should show the layout, but I may have a confusing angle so just let me know).
Filament Colors:
Orange - Sunny Orange, Sunlu (originally used Sunlu Orange, but found Sunny Orange to be slightly closer, still not perfect but closer)
Blue - Blue Grey, Sunlu (nearly perfect match)
Yellow - Pure Yellow, Sunlu (nearly perfect match)
Red - Ruby Red, Flashforge (nearly perfect match). Image shows Sunlu Red, but I re-printed it since this picture was taken and it matches perfect now.
Green - Green, Overture (this green is exceptionally hard to match. I was using Pine Green by eSun which is what is in the pictures, but it was a little too dark. While this is just slightly too light, it's a better overall match and looks better next to the other colors)
Pink - Magenta, Sunlu (another hard to match color, but I was using Sunlu Pink before - shown in this picture - and this is much closer to the right shade)
Black - Black, Sunlu (I'm sure there's a more precise Black, maybe a little more bold/dark, but this is hard to notice much difference)
Purple - Eggplant Purple, Hatchbox (nearly perfect match)
Other Cards oranizer - Light Gold, Sunlu. My original organizer used a lot of this gold color in it, but when I made this one I was nearly out of Light Gold and the color was backlogged so I just used Black. Since I re-used this component, it's still gold :)