Focusrite Scarlett Solo Gen 3 Mount for Office Depot Realspace Zentra Glass Desk
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Focusrite Scarlett Solo Gen 3 desk mount designed to fit under a Realspace Zentra desk.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
Remix of yom's desk mount for the Focusrite Scarlett Solo Gen 3 desk mount, modified to fit under a Realspace Zentra glass desk from Office Depot.
Just snaps onto the front bar. Not quite as sturdy a typical mount with screws (sturdy enough if you're not constantly plugging/unplugging) but for this type of desk, this was the best option I could come up with. If the fitment is a little loose by the top, I would try shimming it with a piece of foam or felt.
Print Settings
Printer: Creality Ender-3 S1
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.2 mm
Infill: 20%
Filament: PETG
Notes: Slice with the opening facing up. Use supports. I recommend using PETG for stronger layer adhesion - especially for the locking tabs and the bar clip.