Cyborg X Valve Stem
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model of the Cyborg X Lazarus Valve Stem
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a model of the Lazarus Valve stem for the Cyborg X.
I created this after my brass valve stem failed with the intent to have a replacement machined in titanium. I wanted to make this available to the wider community in the event someone else wanted to do the same. The stem of this model is slightly thicker at 4mm instead of 3.7mm and has a chamfer at the point the original brass valves were failing.
WARNING: At this time I have not had this valve stem manufactured and therefore it is untested. This model is not meant to be 3D printed and should instead be machined out of an appropriate material.