Prusa CORE One/+/L Advanced Filtration Enhanced Carbon - Remix: 10x3 Round Magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the Advanced Filtration Enhanced Carbon model to use 10x3 round magnets.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 221
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Quick adaptation of the parent model to support 10x3 round magnets that I have on hand from other printer mods.
See upstream instructions here:
The attached 3mf file captures a few critical print settings:
The two models (also attached) must be printed "overlapping" at their original imported coordinates. It is intentional that the two models will be fused together by the printing process.
The
Mesh Cutoutmodel carries customizedInfill, Layers, and Perimeterssettings that produce the triangle filter screen:Infill density: 35%
Infill pattern: Triangles
Bottom solid layers: 0
Perimeters: 0
Top solid layers: 0
Other than this set up, it's a very easy print. No supports or brim required. I printed in 0.2mm STRUCTURALASA filament for no other reason than consistency with my other printer mods.
The 10mm magnet holes had slightly too much clearance to friction fit my magnets, but they secured well with a drop of super glue/cyanoacrylate.