Filament Sample Spool - Faster and larger for Ikea 11qt useage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A larger version of the faster sample spool to more efficiently use storage space in IKEA 365+ Food containers 11qt
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
A taller spool spindle section to interface with Daniel Kasprowicz's "spool_a" model based off Aikoly's work to hold more than 200g of most standard filaments.
This is to more effectively use the space in the IKEA 365+ Food containers 11qt Article Number 395.671.72 that I use for filament storage. The Ikea containers can only hold two normal 1kg spools side by side. So there ends up with a lot of wasted space at the end that only work for smaller diameter sample spool sizes. Working on an even larger diameter one to use even more of the diameter afforded in the narrow direction of the Ikea food container.
Print Data Samples
0.4mm Nozzle
0.2mm layer height
2 Walls
15% Gyroid
22.31 m
57.42 g
≈2.5hrs with Qidi slicer Polymaker ASA profile
0.6mm Nozzle (had problems with the threads visually, but still worked)
0.3mm layer height
2 walls
10% Adaptive Cubic
24.39 m
59.83 g
2hrs with Orca Polymaker ASA profile
<$2 print with Polymaker ASA