Papelera de escritorio con agarre en C
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Papelera de escritorio para tener ordenado tu zona de trabajo/estudio
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
¿Tienes la papelera debajo de la mesa o en una zona de difícil acceso? ¡Aquí tienes esta papelera de escritorio!
Diseñado especialmente para todas las personas que soléis hacer “chapucillas” en el escritorio y no queréis acumular basura en el.
No olvides visitar mi perfil para más diseños increíbles o visita mi página web, Visitar web
Datos de Impresión:
El diseño está pensado para lucir espectacular y detallado sin complicaciones.
Altura de capa agarre C y tornillo: 0.08 para no usar muchos soportes.
Altura de capa cubo: 0.16 - 0.18 va bien con boquilla de 0.4 tiene margen para el acople.
Ancho de Línea: 0.42
Bucles perímetro: indiferente, recomiendo 3
Patrón relleno: Rectilíneo
Densidad relleno: 20% para agarre y Tornillo - 10% para el cubo.
Solape: 15%
Velocidad: Adaptada a tu impresora.
Soportes: Sí, requiere soportes ligeros (estilo árbol recomendados) pero ponlos manualmente como se puede ver en la imagen del agarre, para el cubo se pueden generar automáticamente.
* ¡HAZ LOS TEST! y calibra bien tu impresora para no tener problemas, con mi artillery x4 Pro ha ido bien todo.
[NOTAS] *
Están hechos para imprimir por separado.
---- Traducción ---
Do you have the trash can under the table or in an area that is difficult to access? Here is this desktop trash can! Designed especially for all the people who tend to mess around at the desk and don't want to accumulate trash on it.
Don't forget to visit my profile for more amazing designs or visit my website, Visit website
Printing Data:
The design is designed to look spectacular and detailed without complications.
Height of C grip layer and screw: 0.08 to not use many supports.
Cube layer height: 0.16 - 0.18 works well with a 0.4 nozzle and has room for coupling.
Line Width: 0.42
Perimeter loops: indifferent, I recommend 3
Filled pattern: Rectilinear
Filling density: 20% for grip and Screw - 10% for the hub.
Overlap: 15%
Speed: Adapted to your printer.
Supports: Yes, it requires light supports (tree style recommended) but put them on manually as you can see in the grip image, for the cube they can be generated automatically.
* TAKE THE TESTS! and calibrate your printer well to avoid problems, with my artillery x4 Pro everything went well.
[NOTES] *
They are made to print separately.

