1 / 2
Volvo V70 II fuel tank lock gear strengthened with counterpart — zdjęcie 1
1 / 2

Volvo V70 II fuel tank lock gear strengthened with counterpart

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Strengthened fuel tank lock gear for Volvo V70 II with counterpart so it would fit

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
51
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

This is strengthened fuel lock gear for Volvo V70 II and probably other Volvo cars on platform P2. The original dimensions would just not hold. So I remixed it and made the weak point, which is the worm gear stronger and made the counterpart for it.

In the pictures you can see prototype in PLA printed horizontally, which makes it stronger then vertically, with supports and it works wonderfully, but I was worried it won't hold, which probably would, because it's printed horizontally but I printed my in PA, because I thought it would be strong. I have in car right now, but I would not recommend that either, because the gear cannot be printed horizontally and also it just too much tinkering with it and removing supports is so much pain.

I would recommend PETG because it's tougher than PLA and I think the gear could be printed horizontally which will make it really strong.

Tagi