Mason Jar Lid Rack - UnderShelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a lid rack and undershelf storage solution for Mason Jar (Ball Jar) Lids.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a lid rack and undershelf storage solution for Mason Jar (Ball Jar) Lids.
I used 4 walls, 5% infill, gyroid, .06 nozzle, PLA. I laid the model down with the triangle openings on the bed. You can just print 2 of the model, no need to flip it for the opposite side before printing.
One thing I didn't consider when designing the model is that the screw holes are difficult to access with a standard screwdriver. So, you'll want to use a stubby screw driver or a right angle adapter for a powered driver. Or modify the design, I included the STEP.
When you install it, the space between the two sides is important. So, use the lid rack itself to space it. Pay attention to where the rack sits in the included pictures so you leave room for how large lids extend wider than the rack itself.