Diy turntable with 6x608zz + Revopoint Turntable Expander
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
diy manual 3d scan table compatible with revopoint automatic turntable.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
You can use this model as manual or put it on revopoint's automatic turntable to use automatic. You need 6 608zz and 3 m3 20mm, 3 m3 15mm screw for bottom part. Basically use double side tape to stick "for base" part to anything you wanna use as table and put it on bottom piece. Or you can print 295mm table or use it. All parts compatible with revopoint's pop automatic turntable. so you can use them for expander or turn some plate to manual turntable. + you can use that manual turntable with automatic turn table. Yeah I have some comunication issues. if you did not understand just figure it yourself :D