Travel Cribbage Peg Track — Captive Slide-In Pegs, 1 to 6 Players
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pocket cribbage scorer with captive scoring pegs that can never fall out.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
A travel cribbage score track that fits in a pocket — with scoring pegs that can never fall out. Each player gets one peg riding a hidden T-channel: the peg's foot is wider than the top slot, so once it is on the track it only slides 0 → 10, it can't be lifted off or lost. A kinematic ball-detent clicks the peg into every score station — a rounded ridge under the foot nests into a little 45° Vee groove at each number — so the peg advances with a firm push and self-centres exactly on each number, no slop.
Bundled in every player count, 1 to 6 — one lane and one peg per player. Pick the file for your table.
Print-in-place did not survive the real printer (the captive peg fused to the channel), so this is the reliable redesign: everything prints as separate, clean parts, then you assemble in seconds —
Print the body, the peg(s), and the end cap.
Slide each peg into the open end of its lane, onto the track.
Snap the end cap over the open end — the pegs are now captive.
Nothing to lose, and every part prints flat, deck-up, supportless.
Files (per player count 1–6):
..._2color.stl— the housing. Two named solids: the body and the flush number inlays. In Bambu Studio: Import → right-click → Split to Parts. For a two-colour track assign a second filament to thenumberssolid; for a single-colour track just delete thenumberssolid and the digits stay as clean engravings...._peg1.stl,..._peg2.stl, … — the sliding score pegs, one STL per player so you can print each peg in its own colour. All pegs are the same shape; the count matches the player count...._cap.stl— the slide-in end wall that encloses the pegs.
Print:
PLA or PETG, 0.2 mm layers, 3+ walls
All parts flat on the bed, no supports, no brim
Print the pegs in a contrasting colour so each player's is easy to read
Parametric — the whole thing is one OpenSCAD file (attached). Tune the score range, station pitch, lane spacing, peg size, and every detent / slide clearance, and re-export any player count you like.
