18650 & 18500 Battery Holders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Meant for packaged batteries with on-board BMS boards.
- Ocena
- 5 / 5
- Polubienia
- 88
- Pobrania
- 209
- Wydruki
- 2
- Wyświetlenia
- 927
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a bracket to securely hold a 18500 battery for a recent project. In that case the bracket was merged into the body of the container lid. But I realized the bracket itself might be handy for others, so I added flush mount M2 screw holes, and created a 18650 version also.
Makes a satisfying click to snap the battery into place. Note: they are too long to hold a regular non-packaged 18650 or 18500 battery. Also includes models without the end-caps.
Examples printed in Elegoo natural PLA on a QIDI Plus4 printer at 0.2mm "standard" resolution. Prints as-is with no supports.
Source: https://www.tinkercad.com/things/9XLJagrCP2i-18500-18650-battery-holders