EGO compatible 56v Battery Phone Charger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slide-in device to charge your phone from an EGO 56v battery.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 86
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Public Domain
This is a simple slide-in device that will allow you to charge your phone, tablet, laptop, etc from a 56v EGO battery. PD 30W and QC 18W are supported via USB-A and USB-C connectors. A volt meter is also included.
Hardware needed:
6x M3x8 screws
2x M4x16 screws
4x M4x8 screws
2x Spade wire connectors
2x 50x15x0.8mm strip of copper
60V-capable car charger
You will need two metal strips to serve as the battery contacts. The metal I used can be found here: https://a.co/d/01lShUWy You can use the included template to drill the holes in the contact.
The car charger MUST support up to 60v input. Most only support 12v or 24v. The one I used can be found here: https://a.co/d/058tEC0F