1 / 1
Rigid Shop Vac Adapter for 12" Admiral Miter Saw
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For use with an Admiral (Harbor freight) 12" Sliding compound miter saw and a rigid shop vac.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
You will need to remove the stock
dust collection chute from the saw. this involves removed a couple screws and using some elbow grease to get it out. You will either have to take the saw apart, or break the plastic piece to remove it.
this piece then slides in from the back of the saw and the adapter can then be glued into place.
Print with supports.