1 / 2
Ball joint of the lower control arm axle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is designed specifically to eliminate play in this component.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 1
- Wyświetlenia
- 51
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
This is designed specifically to eliminate play in this component. After you print it, you'll need to machine it with a 3.2mm or 3mm drill bit. You can also machine it from the outside to achieve optimal suspension performance. Basically, just practice.