Threaded Track Cog/Sprocket Organizer ISO 1.375" x 24 tpi
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organize your track bike cogs/sprockets to quickly and easily find the one you are looking for!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I bought an EAI Keirin Tote bag, hoping it would help me to organize my track cogs (sprockets), chainrings, and other tools. What I found was that they would keep falling out of the bag, and, it was difficult to know immediately what the tooth count was on a cog (I resorted to writing the count on the cog with a Sharpie). Then, one day, it occurred to me that I could 3D print a threaded track cog organizer! Each cog could be screwed into its designated spot, which would state the tooth count.
This design is for ISO 1.375" x 24 tpi, but it would be easy to adapt to other threading (however, I'd need help to test it). For now I am publishing a six-cog organizer, from 12T to 17T. I designed this with 1.5mm base plate (I tried 1mm but I preferred it to be stiffer), rounded edges, and 4mm separation between cogs. I also have an 18T, so I might in future publish a single or double carrier for the larger cogs.
I printed mine on PLA because track bikes don't generally get wet. Enjoy!