Kyber Crystal Container - Star Wars Galaxy's Edge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modular kyber crystal container I made to display the different colors available from Star Wars Galaxy's Edge
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed a kyber crystal container that will hold Galaxy's Edge Kyber Crystals. I used Figure Works's kyber crystal container (It appears as though this original model no longer exists) as a base and I scaled it up and added some stuff. There is the main piece, and one is smooth and one has lines down the side so you can choose which ever one you like better. That screws into the cap because I plan on making more adaptations that you could just screw into the cap so you can save on time and filament. Lastly there is a crystal divider that goes into the slot in the main piece. I would suggest buying rubber grommets and gluing them to the slots wall to hold the crystals in place securely. You will need to use supports on the main piece and the cap. I recommend orienting them so that the threads are facing up for both the cap and for the main piece. The crystal divider can be printed on its back with the curved divisions facing upward. That piece does not need supports. ALSO VERY IMPORTANT! I would highly suggest cutting the pieces below the threads to make sure they fit so you don't waste a bunch of time and fillament.
I have added a new piece which is the short crystal container. This is another way to display the crystals vertically around the cylinder. Whats great about this piece is that it can screw into the cap which works for both the short and tall displays. You will still need some rubber grommets glued into the top and bottom to hold the crystals securely.
Update:
February 12, 2022, I have made a new piece for the long crystal container that is one complete piece. This way there is no need to mess with the threads. Print it the same as you would before. This is the way I would suggest to print it. This would definitely work out the best if you just want one way to display them (which is what I do). Also it does not look like there is a cutout for the crystal divider but it is there; it just got moved to the back for some reason. I also added some images of my final product.
If you happen to make this please leave suggestions for improvement in any way. Also add it as a make under this post.