1 / 3
Vanmoof Vanspoof battery cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your vanspoof inside the battery cover.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Modified S2 battery cover to contain a vanspoof module on a vanmoof S3. Looks very clean, and the e-shifter module is completely removed.
I am very much a novice so this model is pretty crude, but it works.
I printed in polymaker pa612-cf15, with .4 nozzle. Two M5 inserts are needed to secure the cover to the bike. I used m2 heat inserts for the small cover but this is probably not necessary.