1 / 5
Einlegeplatte für einen Frästisch mit Oberfräse Festool OF 1400 / — zdjęcie 1
1 / 5

Einlegeplatte für einen Frästisch mit Oberfräse Festool OF 1400 /

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Einlegeplatte für einen Frästisch mit Oberfräse Festool OF 1400

Ocena
0 / 5
Polubienia
3
Pobrania
14
Wydruki
0
Wyświetlenia
123
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

 Einlegeplatte für einen Frästisch mit Oberfräse Festool OF 1400

 Grunplatte 240 x 200 x 10mm

 gedruckt in PETG                                                                                                                                                             Perimeter 5                                                                                                                                                                       Fülldichte 25% - 50%                                                                                                                                                     Füllmuster Gyroid                                                                                                                                                           mit Organische stützen

 benötigt werden :    4x Senkschrauben M6 x  für die Befestigung an den Tisch                                                                                       4x Senkschrauben M4 x 16 oder Gewinde an der Fräse nachschneiden- M4x20                                               4x Senkschrauben M6 x 20                                                                                                                                           8x Gewindeeinsätze M3                                                                                                                                                 4x Senkschrauben M3 x 10                                                                                                                                             4x Gewindestifte ohne Spitze M3 x 8 mm                                                                                                                   2x Unterlegscheiben M5 x 20mm verzinkt für den Höhenmesser

 Für die Höheeinstellung des Fräsers verwende ich 

 Wenn Sie Fragen haben, können Sie sich gerne an mich wenden

_______________________________________________________________________________________

 Insert Plate for a Router Table with the Festool OF 1400 Router

 Base Plate 240 x 200 x 10 mm

 Printed in PETG                                                                                                                                               Perimeter 5                                                                                                                                                                   Fill Density 25% - 50%                                                                                                                                                   Fill Pattern: Gyroid                                                                                                                                                     with organic supports

 Required:                4x M6 countersunk screws for mounting to the table                                                                                                4x M4 x 16 countersunk screws or re-cut the threads on the router - M4x20                                                        4x M6 x 20 countersunk screws                                                                                                                                    8x M3 threaded inserts                                                                                                                                                  4x M3 x 10 countersunk screws                                                                                                                                    4x M3 x 8 mm threaded pins without tips                                                                                                                    2x M5 x 20 mm Galvanized Washers for the altimeter

To adjust the height of the milling cutter, I use 

 If you have any questions, please feel free to contact me