1 / 1
Grado Labs headband rod blocks with thumb screw - Multimaterial — zdjęcie 1

Grado Labs headband rod blocks with thumb screw - Multimaterial

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement rod block for Grado headphones with M3 thumb screw

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
38
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Public Domain

My rod block just fell off one day, so I made this model as a replacement.

Fasten the headband with a flat head M3 screw, between 8 mm and 12 mm in length
Example: https://www.mcmaster.com/92125A130/

Prevent the ear cups from rotating using an M3 thumb screw, minimum 8 mm in length.
Example: https://www.mcmaster.com/99607A271/

EDIT: To the one person who downloaded this model right after I published it, I fixed an issue where the headband wouldn't slot into the hole because of a modelling error. New 3MF and STEP files uploaded.

Tagi