1 / 3
Ersatz für Papphülse der OWL-Filamentspulen (Recycling-Version) — zdjęcie 1
1 / 3

Ersatz für Papphülse der OWL-Filamentspulen (Recycling-Version)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Das Bauteil ersetzt die Papphülse - This component replaces the cardboard sleeve

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
17
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Bei der Recycling-Version der Spule ist die korrekte Funktion der Papphülse nicht gegeben. Sie hält ohne Kabelbinder die beiden Spulenhälften nicht zusammen. Somit rutscht das Filament durch und verwickelt sich.

Die Ersatzhülse aus PETG oder besser passt seht genau in die vorhandenen Verzahnung der Spulenhälften. Die Teile sollten geklebt werden, da Kunststoff fließt und daher die Steckverbindung lose wird.

Ganz nebenbei sind dadurch die Spulen schmaler, wodurch sie in jeden handelsüblichen Filamenttrockner passen.

Optimal ist die Verwendung meiner Spulenreifen.

Für eine gute Haltbarkeit, sollte mit 1 mm Wandstärke gedruckt werden.

In the recycled version of the spool, the cardboard sleeve does not function properly. Without cable ties, it cannot hold the two halves of the spool together. As a result, the filament slips through and gets tangled.

The replacement sleeve made of PETG or a better material fits very precisely into the existing interlocking teeth of the spool halves. The parts should be glued together, as plastic flows over time, causing the snap-fit connection to become loose.

As an added bonus, this makes the spools narrower, allowing them to fit into any standard filament dryer.

For best results, use my spool rings.

To ensure durability, print with a wall thickness of 1 mm.