1 / 2
Fuse 'T' for 2.5mm Fireworks Fuse — zdjęcie 1
1 / 2

Fuse 'T' for 2.5mm Fireworks Fuse

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

For those who like to chain fireworks together with various timed 2.5 mm fuse

Ocena
0 / 5
Polubienia
2
Pobrania
9
Wydruki
0
Wyświetlenia
52
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

For those who like to chain fireworks together with various 2.5 mm timed fuse.  Thread fuse on the firework through the hole first and push to bottom of T.  Then run the main fuse across the top of the T over the firework fuses.

There is a small lip on the top of the T to hold the main fuse in place.  Use your thumb to press the fuse past the lip.

PLA is more of a one time use implementation.  Use a high temp resistant filament for a more permanent installation.

Tagi