Bike / Scooter / Vespa Wheel Balancer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A very simple but efficient vespa wheel balancer when you have nothing else for balancing.... :)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It's the weekend, every shop is closed, you've got a brand-new Vespa wheel to install... but it still needs balancing!
This simple balancer is made with two 608ZZ bearings (Common Skateboard Bearings 8 mm ID, 22 mm OD), three 3 mm screws of any length, and an 8 mm aluminium or steel rod (a threaded rod works just as well).
Simple, inexpensive, and it gets the job done! 😊
Picture show the first version with wheel (prototype) , i've updated all the parts, they are availlable here for download. (other pictures without wheel)
608ZZ Bearing Support must be printet with the 'UP' mark visible