MyAntennas EFHW-4010-LP frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Frame for the EFHW-4010-LP (amateur radio antenna) that you can coil the antenna around when not in use.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
This frame is designed to mount on a EFHW-4010-LP (end-fed half-wave amateur radio antenna) and similar antennas that share the same enclosure. You keep the frame mounted on the antenna, and when you want to store it, simply wrap the antenna wire around the frame. The antenna comes out the opening on one side, and the feed line comes out the opposite side. I designed this to fit in a common MOLLE pouch.
There are three variants which have different mounting holes: M3, M5, and M5 countersunk. The one in the photo uses the M5 frame with heat-set M3 inserts. Use whichever fits the screws you have on-hand. PETG is recommended, and use snug supports for the top rails. I also included a 3MF with the supports set up already.