Mova LiDAX Ultra Trailer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Little cargo carrier for a Mova mower.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
A slight remix of my own weight box for the Mova LiDAX Ultra series of robot mower. This makes a little cargo carrier behind the mower, using the original weight box to lock it in. This allows you to put weight in the main weight box, but also either additional weight, or other ‘cargo’ on the back of the mower.
Such as, if you have bad wifi signal in parts of your yard (the Mova chipset or antenna is fairly bad in the mower), cart around an old router or phone as a wifi repeater to ensure you can watch the camera in all points of your yard. Or carry around a secondary camera to keep tabs on the back end of the mower, to keep someone from sneaking up and stealing it.
Print open face down, either allow bridging or a single strip of supports across the center of the box to help the bridge not be so far. PETG or better to keep from flowing/melting out in the sunlight. Two versions are available; standard with the same depth as the main weight box, and a bit deeper one, which may ride a bit low to the ground if your yard isn't perfectly flat.
Deep box shown with 2lb in the weight box, and an extra 3lb in the cargo box.