Bluey Fidget Clicker-Yes or No
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
fidget clicker
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 219
- Wydruki
- 1
- Wyświetlenia
- 691
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
nspired by the Bluey episode Dance Mode, whether you're a fan of the show or just need some clicks to get through the day, these are a mood booster.
I know there are lots of these out there, but I struggled to find one that I knew for sure fit my keyboard switches, so I decided to design one myself. While I was at it, I also made it larger and more durable for little hands than others I could find. Print profiles are set to print by object for better filament use.
There is a tiny bit of support on the underside of the faces, but settings have been optimized for easy removal. If it doesn't come off by itself on your build plate, just grab it with your flush cutters or needle nose pliers and gently wiggle it back and forth until it comes off in one piece.
Made for the “blue” 3 pin MX style keyboard switches, pictured below. Remove the metal pins and the negative spaces are snap fit accurate, so make sure you feel and hear them go in for proper assembly. No need for glue.
Example of sound made by this style clicker designed by me with blue MX switches