Crocfinity
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Instructions
Print without supports, assemble without glue:
Print 1 stud (parametric_snap_base_Base.stl) and 1 crocfinity base (crocfinity-gridbase.stl):
I recommend 3 walls for the stud
Place the stud through a hole in your Crocs with the crown sticking out the top
Snap the crocfinity base on
Place any 1x1 gridfinity tray of your choice on base
Repeat for other foot
If you're going to be walking around with your gridfinity trays on your clogs, I recommend populating the magnet pockets in each corner (they fit 6x2 mm magnets)
Fine print
The Gridfinity base plate is based on the one generated by https://gridfinitygenerator.com
The Gridfinity system itself is licensed under the MIT License and you can read all about it at https://gridfinity.xyz/