1 / 3
ChipWhisperer-Lite TargetBoard Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
A case for the ChipWhisperer-Lite target board! Perfect to keep your target board protected and safe from ESD and physical damage. Have a look at the photos for reference and feel free to comment with questions. Fusion360 file included for easy remixing/modification!
Printed on an Ultimaker 2 (aftermarket upgrades). Printed 2 versions
- PLA, 0.4mm nozzle, 0.2mm layer height, 15% infill (gyroid), no supports., flat face down
- PETG, 0.4mm nozzle, 0.15mm layer height, 35% infill (gyroid), no supports, flat face down
Both worked fine after a little cleanup. It's designed to hold the board snugly in the bottom case, and for the top case to snap on top and hold the board snugly. Worked really well with the target board that was loaned to me to make the model and test it.